Natural control mechanisms in models of aquatic ecosystems

Based on cybernetic categories of natural control mechanisms, four generations of ecosystem models are distinguished: feed-forward, feedback, self-adaptation and self-organization models. The analysis of the natural control mechanisms in aquatic ecosystems suggests that different processes are controlled in different ways, and, although the four mechanisms were identified in historical sequence, they all operate simultaneously. The concept of self-organization of an ecosystem is introduced and specified for a model of an aquatic pelagic ecosystem. The concept of the ecosystem as a multilayer, multigoal and multiechelon hierarchical system with hierarchy of the levels of biological organization is also introduced.     

Advancing urban ecosystem governance in New York City: Shifting towards a unified perspective for conservation management

New York City’s extensive municipal park system is home to forests, wetlands, and grasslands that provide important ecological and social benefits to the city’s population. While efforts and programs exist to restore and protect these spaces, management recommendations are complex due to variable conditions in urban natural areas. To advance the management of urban natural areas, the first comprehensive ecological assessment was conducted through a collaborative effort across 4000 ha of natural areas within New York City parkland. Field and spatial data were collected and analyzed to identify the extent of forests, the types of forests, and their conditions. This approach will help guide decision-making and prioritization of natural area management at the regional level by developing unique quantitative targets for urban forests. This project serves as an example of collaboration between private and public institutions advancing the governance of urban natural areas to achieve citywide conservation and policy goals.     

Study on Simulating Spatial Distribution and Varying Patterns of Urumqi＇s Population

In this paper, an approach to simulate the spatial distribution of urban population is proposed using urban land use and population statistical data through the geographical information systems （GIS）. Then, the spatial population distribution of Urumqi as a case is simulated by the approach mentioned above and its varying patterns are analyzed by the raster population surface. As a result, producing raster population surface is more accurate and natural than the traditional choropleth map of population density. Concerning the spatial population distribution of Urumqi, the population density declines from south to north and the population distribution mainly presents＇ ＂T-type＂, the population distribution presents multicentre agglomeration and the population distribution of the districts shows different features. The population density varies significantly with the increase in the distance from central business district （CBD）. Finally, it is found in this paper that the development history of districts, terrain and traffic road are main factors that have an influence Urumqi＇s population distribution. This paper tries to provide more accurate population data for the plan and management of urban land, traffic and public facilities in order to enrich the researches on urban population distribution.     

Ecosystem mapping for the implementation of the European Biodiversity Strategy at the national level: The case of Italy

Several international initiatives, including the European Biodiversity Strategy to 2020, promote the identification and mapping of ecosystems as basic tools for the conservation of biodiversity and related services. On coarse scales, the spatial representation of ecosystems is usually based on broad land cover categories that largely overlook important ecological and biogeographic features of the biotic communities they are meant to exemplify. This paper presents a nationwide ecosystem mapping approach that promotes a degree of thematic detail, which is more suited than that found in the continental maps to meeting biodiversity conservation targets in Italy. The approach is based on the rationale that current and potential vegetation cover are valuable proxies for outlining ecosystems. The resulting Ecosystem Map of Italy includes 43 types of forest ecosystems instead of the 5 woodland, forest and other wooded land types recognized at the European level. We outline the expected advantages of this enhanced thematic detail for a number of conservation purposes and highlight how the resulting maps may help to meet biodiversity conservation targets at the national level. In particular, we refer to the assessment of conservation status, the definition of restoration priorities, the planning of green infrastructure and the identification of collapse risks for the ecosystems identified. Comprehensively, the definition, characterization and assessment of ecosystem types represent the carrying structure of the recently launched national system of natural capital accounting.     

大体积水中痕量POPs的联动采集装置及其性能评价

天然水体中的痕量持久性有机污染物(POPs)的定量分析通常需要采集大体积水样.针对大体积水样在过滤和吸附富集过程中滤膜易堵塞且耗时费力的缺点,研制了一种固液分离过滤-吸附富集联动装置.该装置主要由粗过滤器、离心分离屏、倒置微孔过滤器、固相吸附柱、流速控制阀和真空泵组成.与传统的滤膜过滤方式相比,其过滤效率提高了约1.5...     

长白山的台风灾区范围及植被恢复动态——基于遥感技术的研究

通过对1985年和1987年Thematic Mapper(TM)影像中提取出的归一化植被指数进行对比分析,提取了1986年长白山自然保护区内遭受台风袭击后的灾区范围,并通过比较1988年和2007年的TM影像,分析了风灾区的植被恢复过程。同时,结合该地区的地形、水文、土壤和公路数据对风灾区的植被恢复进行了驱动力分析。发现地形驱动因子与风灾区的恢复程度呈高度相关,随着高程、坡度和平地所占比例的减少,恢复程度逐渐变好;此外水文、土壤和人类活动都对风灾区的植被恢复产生一定影响,另外人工干预恢复对植被生长也起着积极的作用。研究结果可供风灾区内植被的进一步恢复和森林防火工作参考。     

Application of FeIII-TAML/H2O2 system for treatment of fluoroquinolone antibiotics

Over the recent past, fluoroquinolone antibiotics (FQs) have raised extensive attention due to their potential to induce the formation of resistance genes and “superbugs”, thus various advanced oxidation techniques have been developed to eliminate their release into the environment. In the present study, the prototype tetraamido macrocyclic ligand (Fe^III-TAML)/hydrogen peroxide (H₂O₂) system is employed to degrade FQs (i.e., norfloxacin and ciprofloxacin) over a wide pH range (i.e., pH 6-10), and the reaction rate increases with the increase in pH level. The effect of dosage of Fe^III-TAML and H₂O₂ on the degradation of FQs is evaluated, and the reaction rate is linearly correlated with the added amount of chemicals. Moreover, the impact of natural organic matters (NOM) on the removal of FQs is investigated, and the degradation kinetics show that both NOM type and experimental concentration exhibit negligible influence on the oxidative degradation of selected antibiotics. Based on the results of liquid chromatography-high resolution mass spectrometry and theoretical calculations, the reaction sites and pathways of FQs by Fe^III-TAML/H₂O₂ system are further predicted and elucidated.     

Effects of reductive inorganics and NOM on the formation of chlorite in the chlorine dioxide disinfection of drinking water

Chlorine dioxide (ClO₂) disinfection usually does not produce halogenated disinfection by-products, but the formation of the inorganic by-product chlorite (ClO₂^–) is a serious consideration. In this study, the ClO₂^– formation rule in the ClO₂ disinfection of drinking water was investigated in the presence of three representative reductive inorganics and four natural organic matters (NOMs), respectively. Fe²⁺ and S^2– mainly reduced ClO₂ to ClO₂^– at low concentrations. When ClO₂ was consumed, the ClO₂^– would be further reduced by Fe²⁺ and S^2–, leading to the decrease of ClO₂^–. The reaction efficiency of Mn²⁺ with ClO₂ was lower than that of Fe²⁺ and S^2–. It might be the case that MnO₂ generated by the reaction between Mn²⁺ and ClO₂ had adsorption and catalytic oxidation on Mn²⁺. However, Mn²⁺ would not reduce ClO₂^–. Among the four NOMs, humic acid and fulvic acid reacted with ClO₂ actively, followed by bovine serum albumin, while sodium alginate had almost no reaction with ClO₂. The maximum ClO₂^– yields of reductive inorganics (70%) was higher than that of NOM (around 60%). The lower the concentration of reductive substances, the more ClO₂^– could be produced by per unit concentration of reductive substances. The results of the actual water samples showed that both reductive inorganics and NOM played an important role in the formation of ClO₂^– in disinfection.     

A “measurable” definition of sustainable development based on closed cycles of resources and its application to energy systems

Human society consumes resources that it is not able to reproduce. Human activities are still based on “open cycles,” starting from a condition of natural environmental balance and reaching an environmental imbalance. The challenging scope of scientific and technological research towards sustainability appears clear if it is based on this analysis: to find development systems based on “closed cycles” of resources. The challenging objective of realizing closed cycles leads to a definition of sustainability that indicates the path to sustainable development, as well as stating the general principle. It also provides a key to the qualitative measurement of sustainability. This means that the sustainability level of a system can be measured by measuring its capacity to avoid the consumption of resources. Zero consumption is a necessary condition for sustainability, and brings about as a side effect the highly desired “zero-waste” result. Materials entering the proposed endless scheme pass through the process of usefulness without losing their capacity to feed the system again after being used. Thus, the concept of “consumption” itself is replaced by one of “use” when resources are inserted into closed loops capable of feeding human development. The application of the closed cycle sustainability criterion particularly displays its feasibility, and a theoretical guiding role, in the energy sector. Energy vectors such as hydrogen and electricity enable the closure of the energy resources loop by effectively approaching the objective of “zero consumption” (and the side result of “zero waste”) through already demonstrated technological solutions.